Home / Products / Starter Packs / SP4W1-3
Product Code: (SP4W1-3)
£2200.00
Prices are exclusive of V.A.T.
Comprising:
 |
1x PS6 Power Unit |
|---|---|
| Product Code: PS6A220 (220-230v) Product Code: PS6A240 (230-250v) Product Code: PS6B100 (100-110v) Product Code: PS6B120 (110-120v) |
|
| The power unit and cord will be configured to suit the mains power supply of the country of destination unless otherwise specified. | |
|
|
4x FU1 Feeders |
|---|---|
| Product Code: FU1-3 | |
| Each feeder is supplied complete with a 3ml standard meal reservoir (R37P30) and an O-ring. | |
 |
1x pack Hemotek Collage Feeding Membrane |
|---|---|
| Product Code: MEM5 | |
| The Hemotek Feeding Membrane is a thin collagen membrane and is suitable for many insect species.Pack of 5 x (700mm x 580mm). Sufficient for about 500 feeds. | |
 |
200x Plastic Plugs |
|---|---|
| Product Code: PP5-200 | |
| Plastic plugs used as closures for the meal reservoirs are also used to seal the body of the feeder after setting the temperature. Pack of 200 |
|
 |
4x O-rings |
|---|---|
| Product Code: OR37-25 | |
| O-rings to fit 3ml Standard Reservoir (R37P30), used to secure and seal the membrane to the meal reservoir. | |
 |
1x Temperature Setting Tool |
|---|---|
| Product Code: TST1 | |
| The temperature setting tool locates in the slot of a small screw inside the top of the FU1 Feeder. The operating temperature of the feeder is adjusted by turning the screw. |
|
 |
1x Plug Extracting Tool |
|---|---|
| Product Code: PET1 | |
| The plug extracting tool is used to remove the plug from the top of the FU1 Feeder, screw in and pull. It can also be used to remove the plugs from the meal reservoir. |
|
 |
1x Digital Thermometer and Probe |
|---|---|
| Product Code: DTK1 | |
| Type K single channel digital thermometer and dedicated Hemotek type K probe. Supplied with manufacturer’s certificate of calibration and protective carry case. |
|